Hi Again Guys
This evening i stripped the rear end of my cr and prepared it for the conversion.
I started with a new rear shock tower and i used a dremmel cutting disk and sanding drum to remove the front mounting holes on the rear tower than sanded flat...
There is very little modification required to the rear end for the cr2 conversion. Simply Move the wing mounts to the opposite side than normal and mount the shocks on the rear of the wishbone. Here's one i made earlier......
Hopefully my conversion will arrive tommorow which will mean the real build can comence.
Wednesday 16 September 2009
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment